According to the properties of construction piling, cast-in-place pile, tunnel mud-water shield sludge and mud, how does the piling mud treatment equipment produced by the company treat the mud of the pile foundation machine on site. One piece of equipment can process 30-100 cubic meters of mud in one hour, helping customers achieve mud-water separation. The water can be recycled, the extruded mud cake has a low moisture content, and it can be directly packaged and transported without dripping; the whole set of equipment is easy to operate, has a large processing capacity and low energy consumption.

The refined wet slag raw material (or solid-liquid mixture) enters the hopper continuously through the screw pump or conveyor (the bandwidth of the material can be adjusted). Driven by the driving roller, the inner and outer ring-shaped filter belts are evenly distributed by the spiral nip roller, and begin to enter the curved arc-shaped wedge-shaped area for initial pressure dehydration, and then enter the low-pressure area. The pressure roller of the belt-shaped bead of the piling mud processing equipment presses out a large amount of water to ensure that the water is discharged from both sides, and then enters the high-pressure area of ​​the ground clamp. The inner and outer filter belts go around several pairs of squeezing rollers with decreasing diameters, and a large amount of water is slowly squeezed out to form a pressable filter cake. On the other hand, the S-shaped winding of the filter belt generates an increasing shear force on the surface pressure. A large amount of moisture in the material is discharged through the squeeze roller, and collected and discharged through the water tank. After the inner and outer filter belts are separated, the wear-resistant scraping device scrapes off the dehydrated filter cake (pomace) on the working surface of the inner and outer filter belts. After that, through the high-pressure solid conical convex cleaning nozzle, a fan-shaped cross water belt is formed to continuously clean the mesh belt and maintain a continuous dehydration effect.

The construction mud press can effectively dewater piling mud and drilling mud, help you achieve mud-water separation, and the pressed water is clear and can be recycled for discharge. The operation is simple, just press a button, the piling mud processing equipment runs automatically, and the labor intensity of the workers is low!