With the rapid development of engineering construction in our country, although the governments of various countries have promulgated many policies and regulations, sediment pollution, especially river pollution accidents are also increasing, and a large amount of money has also been invested in the process of sludge treatment. However, due to Lack of good mud treatment methods, coupled with profit-driven, many measures are not effective. Therefore, finding an economical and environmentally friendly treatment method for mud has become an urgent need for social development. The current method of treating waste mud should belong to mud treatment equipment in terms of effect. The overall size of the whole machine mud water treatment equipment is large, the floor area is small, the structure is reasonable, and it is convenient to move. The effect of the equipment's own frequency conversion control cabinet and the motor can realize control and protection. The efficiency of sludge recovery is high, and the effect of dehydration and dry stacking is ideal. Both the pipeline and the sand outlet have reached a high standard of plugging, reducing splashes to the surroundings during construction.

  The pile sinking mud generated during sludge treatment is inevitable. What is the statement about the amount of pile sinking sludge?

  1. The cost of piling mud treatment.

  The cost of processing one cubic meter of piling cement is about 10 yuan, including electricity, medicine, mechanical loss, labor, and other costs are not included (earthwork transportation costs, etc.).

  2. Quantity of piling mud treatment.

  The processing capacity of the horizontal screw centrifuge is generally 10-15 cubic meters per hour. Of course, the solid content of the mud is about 30%. If it is only 20%, the processing capacity of the decanter centrifuge should be 15-20 cubic meters.

  3. Can there be so little mud for piling?

  Because the discharge volume of the decanter centrifuge is basically constant, if the pumping treatment is performed, as long as the water discharge and the discharge time are enough to discharge the amount. But the sludge in it is different, the more sludge, the longer it takes to process in the drum.

  4. Handling of medicines.

  This product is basically added with PAM, which is mainly cationic, and the price of cationic flocculant is relatively high. When treating mud, the agent is prepared with 1.5-2 percent water. Add mud water, that is, one cubic water dissolves at least 1.5 kg of powder, And one cubic meter of stirred potion water can basically handle 3 cubic meters of mud. If the mud water without chemical treatment is still mud water, but the specific gravity will be much lighter than the original, but the discharged water still looks very turbid. The decanter centrifuge can indeed filter out part of the mud, but it cannot meet the discharge requirements.

  The emergence of mud environmental protection treatment equipment has given workers more choices!

  Sludge dehydration is continuous, closed, and the work is done automatically without causing blockage, so the production efficiency is high. Continuous input, clarified liquid and dewatered cake are continuously discharged, and the transportation is a fully automated process, which greatly reduces the labor intensity of workers. The machine with the same processing capacity is small in size, large in processing capacity, good in sorting performance and wide in application. Now it is widely used in industrial and mining industries such as geology and mineral resources, petroleum, chemical industry, metallurgy, medicine, and environmental protection.